Duratec® Clear Hi-Gloss Gel Coat Additive Options:Case (4 Gallons) with only three layers typically

with only three layers typically necessary to produce non-structural pieces

exceptional craze resistance and minimum distortion are paramount

plain weave provides superior dimensional stability and holds together well when cut

away from direct sunlight and humidity

12-14 Strength 610-640 KSI Tensile Modulus 33

Duratec® Clear Hi-Gloss Gel Coat Additive Options:Case (4 Gallons) with only three layers typicallyDuratec Clear High Gloss Additive can be blended with numerous gel coats to create a glossy, smooth finished surface. Mix at a 1: 1 ratio with regular gel coat to reduce viscosity and porosity, improve gloss level, and permit a complete open air cure. It can also be blended at 15% with tooling gel coats to upgrade mold surfaces, improve gloss retention, increase impact resistance, and reduce heat distortion. The reduction in viscosity allows gel coats